Jet-X™ 2000

Engineered water-jet tail cutting solutions for all paper grades


There is no mechanical stressing off the sheet during the cutting process. A high-pressure water-jet cuts the paper at high pressure through a small diameter diamond nozzle. The Jet-Xtm has the following advantages over mechanical tail cutters :

  • Not affected by sheet oscillation – critical on high speed machines
  • Not affected by sheet speed
  • Not affected by sheet moisture
  • Not affected by sheet caliper
  • Not affected by sheet tension
  • Can cut on the dryer cylinder as well as in the “open draw”
  • Prevents sheet breaks from clean water-jet cut
  • Dust free cutting
  • No blade sharpening


  • Automatic tail positioning to programmed widths
  • High cutting pressure – up to 2,000 bar (29,000 PS)
  • Diamond cutting nozzles for consistent jet and long life
  • Single inner beam slide-out assembly for maintenance


The Jet-Xtm 2000 is an automated, single cut water-jet tail cutter with precise tail positioning capability. Jet-Xtm tail cutters are operating worldwide on paper grades including :

  • Directory paper
  • Newsprint
  • SC
  • LWC base
  • LWC coated
  • Coated fine paper
  • Linerboard
  • Paperboard
  • Corrugating medium
  • Pulp

Download our Brochure

    Over 600 systems installed worldwide
    Over 600 systems installed worldwide
    Our solutions
    Contact one of our representatives today
    Contact one of our representatives today