The Jet-X™ PZR is an automated single-cut low-pressure (300 psi/20 bar) water-jet wet-end tailcutter with precise tail width capability. It can be installed over the forming fabric ahead of the couch roll or under the press fabric.
The Jet-X™ PZR Dual-Head is an automated low-pressure (300 psi/20 bar) water-jet wet-end tailcutter with precise tail and trim width positioning. It can be installed over the forming fabric ahead of the couch roll or under the press fabric.
Slide-out feature of a “beam within a beam” is standard
Two variable frequency drives with a cooled encoder for speed and positioning control
Stainless steel construction DIN 1.4404 (AISI 316L)
Compact beam with fixed lifting hooks
Motor drives can be located on the tending or drive side
Advantages
The inner beam is designed to slide out, providing easy access to inner components for maintenance
Drive components are enclosed to prevent dirt and water infiltration
Multiple preset tail widths, positions, and trim widths are easily operator-programmable
Adjusting the trim positioning can reduce energy and handling costs by removing trim at the wet-end instead of after the reel when changes in paper grades and basis weights are common
Can be operated by remote HMI
MEDIA GALLERY
Learn More About Our Solutions
Jet-X™ PZR Dual-Head
Let's Connect and Discuss Your Needs!
Get in touch to learn more about our solutions and how we can contribute to realizing your objectives.